Wrong Way RC.com
Your Subtitle text
WrongWayRC Engine parts
30cc Single Bolt adapter for DLE-30
Made in USA with 6061 T6 aluminum this single bolt prop adapter can eliminate
the need for drilling your DLE-30 cc prop once installed. Using the equivalent of a grade 8 bolt it comes complete with instructions, 4mm x 4 attach bolts and 8mm
center bolt with 10mm phenolic shim.
The center bolt is drilled for the use of a 10-32 spinner nut. This adapter will allow
you to move your prop 3/4 of an inch forward if desired, or allow you to move your engine 3/4 of an inch rearward to help with engine head and muffler.
Instructions are included, requires cutting of the original prop shaft and once the conversion is done will add 1.4 ounces weight to your setup. The single bolt prop adapter, when not used with a spinner, will allow the use of an electric starter
where the original 4 bolt configuration makes it difficult to use an electric starter.
Click Here to Purchase
Intro Price $19.99
The is the (
Rcexl ignitions
High quality auto advance single spark ignition comes with hall sensor and two different types of mounting brackets (shallow and deep). Also has spiral wrap to protect your ignition wires.
Choose for your application
10mm single spark version for NGK CM6 application $46.99
14mm single spark version for NGK BPMR6F application $46.99
1/4 32 thread single spark for NGK ME-8 spark plug application with 90 degree bend $46.99
1/4 32 thread single spark for NGK ME-8 spark plug application with 120 degree bend $46.99
10mm twin spark version for NGK CM6 twin cylinder application $66.99
Rcexl, Tachometers, Kill Switches, Gadgets
Mini tachometer installs inline with supplied Y harness. Set your high and low RPM with digital inline tach (accuracy to 10 rpm) $19.99
Optically Isolated kill switch plugs into spare receiver channel to turn ignition on and off from your radio. $19.99
Ignition tester plugs into ignition box (at hall sensor) to run your ignition to spark plug circuit from 400 to 20,000 rpm. $9.99
Hall Effect Sensor plugs into the hall sensor to test its function, also provided is degree wheel to check ignition timing at the hub. $14.99
Hall sensor with two brackets for replacement parts $8.99
ngine Parts
Throttle Arms 3/4 inch or
1 inch $6.99 ea. MADE IN THE USA
Made in the USA these machined throttle servo arm mount on your carburetor and offer silky smooth throttle transition. Also can be used on your carburetor choke.
Ignition Switch harness/gold plated connectors
w/charge mount $6.99
Ignition switch harness with gold plated connectors and fuselage charge mount. High quality with Futaba J connector.
Honda CM-6 (same plug different box) $6.99
NGK CM-6 Out of stock
NGK BPMR6F $5.99
Denso T-20MP-U (crossover plug NGK BPMR6F) $4.99
Replacement for Rimfire 1/4-32 spark plug (not in photo) $10.99
New Iridium ICM-6 Spark Plug from Rcexl.
Same heat range as NGK-CM-6
$8.99
Click to view all our spark plugs here
Brass adapter for spark plug.
14mm to 10mm plug hole $6.99
14mm to 1/4 - 32 plug hole $6.99
Brass adapter that screws into the spark plug hole to change your spark plug size from 14mm threads to 10mm threads or to size from 14mm thread down to the 1/4 - 32 thread size for the NGK ME8 size spark plug.
1 inch Carburetor velocity stack fits your
40-60cc carburetor $4.99
Measures 1 inch tall with hole spacing at 1 1/4 inch. Made of of black composite material with brass hole spacers. This unit will just bolt on top of your existing carburetor.
Throttle Arms 3/4 inch or
1 inch $6.99 ea. MADE IN THE USA
Made in the USA these machined throttle servo arm mount on your carburetor and offer silky smooth throttle transition. Also can be used on your carburetor choke.
Ignition Switch harness/gold plated connectors
w/charge mount $6.99
Ignition switch harness with gold plated connectors and fuselage charge mount. High quality with Futaba J connector.
Honda CM-6 (same plug different box) $6.99
NGK CM-6 Out of stock
NGK BPMR6F $5.99
Denso T-20MP-U (crossover plug NGK BPMR6F) $4.99
Replacement for Rimfire 1/4-32 spark plug (not in photo) $10.99
New Iridium ICM-6 Spark Plug from Rcexl. Same heat range as NGK-CM-6
$8.99
Click to view all our spark plugs here
Brass adapter for spark plug.
14mm to 10mm plug hole $6.99
14mm to 1/4 - 32 plug hole $6.99
Brass adapter that screws into the spark plug hole to change your spark plug size from 14mm threads to 10mm threads or to size from 14mm thread down to the 1/4 - 32 thread size for the NGK ME8 size spark plug.
1 inch Carburetor velocity stack fits your
40-60cc carburetor $4.99
Measures 1 inch tall with hole spacing at 1 1/4 inch. Made of of black composite material with brass hole spacers. This unit will just bolt on top of your existing carburetor.
ade in the USA. SWB Manufacturing servo arms. We carry the1.5 and 2 inch half arm for Hitec,
Futaba and JR Servo and rudder application.
NEW Pull Pull Wire Connector
Click to view all our assorted SWB arm
Futaba and JR Servo and rudder application.
NEW Pull Pull Wire Connector
Click to view all our assorted SWB arm
